所謂良好的 "視窗安裝程式", 就是預先在 CD-ROM 複製完整的視窗在硬盤上, 只複製 win95, win98
或 ME 的資料夾便可. ( 視窗 2000 使用者需連子目錄一起複製, 即 Lang 目錄)
以下便是快速清除視窗95的實例, 視窗98或98SE的使用者如同 :
1. 重新啟動電腦
2. 當 " Starting Windows 95 " 畫面出現前,按 F8 鍵不放
(Windows 98 使用者, 可按住Ctrl鍵代替)
3. 營幕顯示了選擇性開機畫面
4. 用↑↓或數字鍵選擇 " Step-By-Step processing " 按 Enter 鍵
5. 當訊息 "rocess the system registry" 顯現時,按 N 鍵
6. 當訊息 "Create a startup log file (bootlog.txt)" 顯現時按 N 鍵
7. 當訊息 "Device=c:windowshimem.sys" 時按 Y 鍵
8 接下來所有顯示的訊息都按 N 鍵
9. 最後訊息停止,回到 DOS 的模式裡
10. 鍵入 smartdrv 按 Enter 鍵
11. 鍵入 attrib -r -h -s *.* 按 Enter 鍵
12. 鍵入 del *.* 按 Enter 鍵,再按 Y 鍵
13. 鍵入 dir 按 Enter 鍵,確定根目錄下已經沒有任何的檔案或文件
14. 鍵入 deltree progra~1 按 Enter 鍵,再按 Y 鍵
15. 鍵入 deltree windows 按 Enter 鍵,再按 Y 鍵
16. 成尼R除 "視窗 95/98"
注: 步驟 14和15的先後次序不可倒轉 !!!!!
視窗 ME 使用者, 請先在電腦的 (新增/移除程式) 內建立開機片, 以方便進行以下的步驟 :
1. 插入預先準備好的開機片, 重新啟動電腦
2. 營幕顯示了選擇性開機畫面
3. 用↑↓或數字鍵選擇 " Minimal Boot " 按 Enter 鍵
4. 訊息停止,回到 DOS 的模式裡
5. 鍵入 ' C: ' 按 Enter 鍵
6. 鍵入 smartdrv 按 Enter 鍵
7. 鍵入 attrib -r -h -s *.* 按 Enter 鍵
8. 鍵入 del *.* 按 Enter 鍵,再按 Y 鍵
9. 鍵入 dir 按 Enter 鍵,確定根目錄下已經沒有任何的檔案或文件
10. 鍵入 deltree progra~1 按 Enter 鍵,再按 Y 鍵
11. 鍵入 deltree windows 按 Enter 鍵,再按 Y 鍵
12. 成尼R除 "視窗 ME"
如你巳是 Windows ME 的使用者, 想重新安裝舊有 Win95/98或SE的板本, 當完成上列清除步驟
並鍵入 setup 的時候, 會出現下列句子 :
"Setup found a compressed volume or a disk-cache utility on your computer.
Quit Setup and check your compressed volume with your disk compression software
or remove the disk-cache utility. Then run Setup again."
這是因為新的系統和舊有Win95/98/SE產生不相容所致,
這時候只需鍵入 setup /is 按 Enter 鍵便可 !!!